Export to Text File

This type of exam is typically used by instructors who wish to add their own embellishments to an exam. After Quiz Master exports the exam to a text file (usually with the extension .txt), it can be edited with a word processor.

This feature also allows you to email the exam virtually anywhere in the world, for example to physically impaired students, absentee students, and colleagues. You can also send the HTML formatted diagram page along with the graphics files needed.

Quiz Master can produce both the text file and an HTML version of the diagrams from your question banks and diagrams.

Below is a sample exam exported to a text file using Quiz Master.
Notes
The (8071) in question # 1 is the book number. These are optional numbers you can use if you created a question bank from a published source. Printing them on the exam is optional.
Any distracter style ( for example, A- B- C-,  1.2.3.,  or  a.b.c) can be chosen for the exam regardless of how they are defined in the question banks.
You can set the word wrapping position before exporting.

Example of Printed Exam

1. (8071) If an engine operates with a low oil pressure and a high oil temperature, the problem may be  caused by a

A) sheared oil pump shaft.
B) leaking oil dilution valve.
C) clogged oil cooler annular jacket.

2. (8614) (Refer to figure 4.) Placing the engine master switch and battery switch to the on position, and advancing the power lever allows current to flow from the bus to the

A) fuel valve, external power receptacles, power lever switch, power lever relay coil, and ignition solenoid coil.
B) fuel valve, power lever switch, power lever relay coil, fuel pumps, and one ignition solenoid contactor.
C) fuel valve, external power receptacles, undercurrent solenoid contacts, starter solenoid coil, and ignition solenoid contacts.

3. (8002) A condition that can occur in radial engines but is unlikely to occur in horizontally opposed engines is

A) zero valve clearance.
B) valve overlap.
C) hydraulic lock.

4. (8058) A characteristic of dyna focal engine mounts as applied to aircraft reciprocating engines is that the

A) shock mounts eliminate the torsional flexing of the powerplant.
B) engine attaches to the shock mounts at the engine's center of gravity.
C) shock mounts point toward the engine's center of gravity.

5. (8045) How is proper end-gap clearance on new piston rings assured during the overhaul of an engine?

A) By using rings specified by the engine manufacturer.
B) By placing the rings in the cylinder and measuring the end-gap with a feeler gauge.
C) By accurately measuring and matching the outside diameter of the rings with the inside diameter of the cylinders.

----------------------------------------------------------------------

Answer Key

Sample Printed Exam

----------------------------------------------------------------------
Question Banks
----------------------------------------------------------------------
1 Powerplant
----------------------------------------------------------------------
Printer Settings
----------------------------------------------------------------------
Book Numbering On
Shuffle Mode On
Scramble Mode On
----------------------------------------------------------------------
Question #, Question Bank #, Book #, Answer, Explanation/Reference...
----------------------------------------------------------------------

1, 1, 8071, B, AC 65-12A
2, 1, 8614, B, EA-ITP-P2
3, 1, 8002, C, AC 65-12A
4, 1, 8058, C, AP
5, 1, 8045, B, AC 65-12A

Quiz Master Standard Edition Ver. 3.0 (c) Hallandales Inc. 1995 - 2002